Steps
1. Align and place the fan on the palm-rest and keyboard assembly.
2. Replace the two screws that secure the fan to the palm-rest and keyboard assembly.
3. Route the I/O-board cable through the routing guides on the fan.
4. Connect the fan cable to the system board.
5. Connect the I/O-board cable to the system board and close the latch.
6. Adhere the tape that secures the I/O-board cable to the system board.
7. Adhere the mylar that covers the fan cable.
Next steps
1. Install the
.
2. Follow the procedure in
after working inside your computer
.
Identifier
GUID-D99D5F9B-0FF3-406B-A51F-FFA061BB89EA
Version
1
Status
Released
Coin-cell battery
Identifier
GUID-F950F53C-BF01-4A38-AE01-5DCE5BED09F2
Version
1
Status
Released
Removing the coin-cell battery
Prerequisites
1. Follow the procedure in
before working inside your computer
2. Remove the
About this task
The following images indicate the location of the base cover and provide a visual representation of the removal procedure.
Removing and installing components
39
Summary of Contents for Inspiron 14 5408
