Steps
1. Using the alignment posts and rubber grommets, place the speakers in the slots on the palm-rest and keyboard assembly.
NOTE:
If the rubber grommets are pushed out of the speakers when removing the speakers, push them back in place
before replacing the speakers.
2. Route the speaker cable through the routing guides on the palm-rest and keyboard assembly.
3. Connect the speaker cable to the system board.
4. Connect the keyboard-backlight cable and the keyboard cable to the system board.
Next steps
1. Install the
.
2. Install the
.
3. Follow the procedure in
after working inside your computer
.
Identifier
GUID-4763D26B-7C39-4B91-8B4D-F3949F445181
Version
1
Status
Released
Removing the speakers (in 3-cell battery configuration)
Prerequisites
1. Follow the procedure in
before working inside your computer
2. Remove the
3. Remove the
.
About this task
The following images indicate the location of the speaker and provide a visual representation of the removal procedure.
Removing and installing components
53
Summary of Contents for Inspiron 14 5408
