Identifier
GUID-55191E96-11E1-41C9-86CF-31B4CF669B5B
Version
1
Status
Released
Installing the 2230 solid-state drive in M.2 slot one
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
NOTE:
This procedure applies only to computers shipped with a 2230 solid-state drive installed in M.2 slot one.
NOTE:
Depending on the configuration ordered, your computer may support a 2230 solid-state drive or a 2280 solid-
state drive in M.2 slot one.
NOTE:
Install the solid-state drive mounting bracket, if it is not installed.
The following image indicates the location of the 2230 solid-state drive that is installed in M.2 slot one and provides a visual representation
of the installation procedure.
Steps
1. Align the notches on the solid-state drive with the SSD1 slot on the system board.
2. Slide the solid-state drive into the SSD1 slot on the system board.
3. Replace the screw (M2x3) that secures the solid-state drive to the palm-rest and keyboard assembly.
Next steps
1. Install the
.
2. Follow the procedure in
after working inside your computer
.
Removing and installing components
25
Summary of Contents for Inspiron 14 5408
