Dell Inspiron 14 5408 Service Manual Download Page 56

Page: 56 / 91

Identifier

GUID-4DA6FA84-FF63-4D31-A148-125AAD9F4B2B

Version

Status

Released

Heat sink

Identifier

GUID-5A171DD6-51E6-481B-9F9C-A2FBB0CA9F54

Version

Status

Released

Removing the heat sink

Prerequisites

1. Follow the procedure in

before working inside your computer

2. Remove the

base cover

About this task

CAUTION:

For maximum cooling of the processor, do not touch the heat transfer areas on the heat sink. The oils in your

skin can reduce the heat transfer capability of the thermal grease.

NOTE:

The heat sink may become hot during normal operation. Allow sufficient time for the heat sink to cool before you

touch it.

The following images indicate the location of the heat sink and provide a visual representation of the removal procedure.

Steps

1. In the reverse order (7>6>5>4>3>2>1), loosen the seven captive screws that secure the heat sink to the system board.

NOTE:

The number of screws varies depending on the configuration ordered.

2. Lift the heat sink off the system board.

Removing and installing components

Summary of Contents for Inspiron 14 5408




























































































Search results

Summary of Contents for Inspiron 14 5408

Reviews:

Related manuals for Inspiron 14 5408

Brands by name

Popular brands

Dell Inspiron 14 5408, Service Manual

Search results

Summary of Contents for Inspiron 14 5408

Reviews:

Related manuals for Inspiron 14 5408

Brands by name

Popular brands