Button
Item
Description
To print a demo
page
In Ready mode, press and hold
for 2 seconds until both LEDs blink slowly, and
release.
Manual feeding
Press
each time you load a sheet of paper in the tray, when you select
Manual Feed
for
Source
from your software application.
For detailed information, see
"Using Manual Feed Mode"
.
To cancel a print
job
Press
during printing.
blinks red while the print job is cleared from both
the printer and the computer, and the printer then returns to Ready mode. This
may take some time depending on the size of the print job.
In Manual Feed mode, you can't cancel the print job by pressing
.
Manual Duplex
feeding
Press
each time you load the paper back in the tray after the first side of your
job has printed while manual duplex printing.
For detailed information, see
"Printing on Both Sides of Paper (Manual Duplex)"
.
Installing the Starter Toner Cartridge
1.
Open the front cover.
2.
Unpack the starter toner cartridge from its package and thoroughly shake the cartridge from
side-to-side 5 or 6 times to distribute the toner evenly inside the cartridge.
