The printer is malfunctioning.
Check the LEDs on the operator panel to
determine if the printer is indicating a
system error.
Paper does not feed
into the printer.
Paper has not been loaded
correctly.
Remove paper from the tray and reload it
correctly.
There is too much paper in the
tray.
Remove excess paper from the tray.
The paper is too thick.
Use only paper that meets the specifications
required by the printer.
Printing is
extremely slow.
The job may be very complex.
Reduce the complexity of the page or try
adjusting the print quality settings.
The maximum print speed of the printer is
14(A4) or 15(Letter) pages per minute.
If you are using Windows 98/Me,
the Spooling Setting may be set
incorrectly.
From the
Start
menu, choose
Settings
and
Printers
. Right-click
Dell Laser Printer
1110
, choose
Properties
, click the
Details
tab, and then choose the
Spool Settings
button. Select the desired spool setting.
Half the page is
blank.
The page layout is too complex.
Simplify the page layout and remove any
unnecessary graphics from the document.
The page orientation setting may
be incorrect.
Change the page orientation in your
application.
The paper size and the paper size
settings do not match.
Ensure that the paper size selected in the
print settings matches the paper in the tray.
The paper keeps
jamming.
There is too much paper in the
paper tray.
Remove excess paper from the tray.
If printing on special materials,
use the
manual feed mode.
An incorrect type of paper is being
used.
Use only paper that meets the specifications
required by the printer. See
"Paper
Specifications"
.
There may be debris inside the
printer.
Open the front cover and remove the
debris.
The printer prints,
but the text is
wrong, garbled, or
incomplete.
The printer cable is loose or
defective.
Disconnect the printer cable and reconnect.
Try a print job that you have already
printed successfully.
If possible,
attach the
cable and printer to another computer and
try a print job that you know works. Finally,
try a new printer cable.
The wrong printer driver was
selected.
Check the application's printer selection
menu to ensure that your printer is
selected.
The software application is
malfunctioning.
Try printing a job from another application.
Pages print, but are
blank.
The toner cartridge is defective or
out of toner.
Thoroughly shake the toner,
if necessary
.
See
"Redistributing Toner"
.
If necessary
, replace the toner cartridge.
