simplifying the page layout and removing unnecessary graphics from your
document.
In Manual Feed mode, there is no paper in the paper tray. Load paper into the
tray and press
to start printing.
The toner cartridge is nearly empty. Redistribute the toner to temporarily extend
the life of the toner cartridge.
If this does not improve print quality,
install a new
toner cartridge. See
"Replacing the Toner Cartridge"
.
Troubleshooting Checklist
If the printer is not working properly,
consult the following checklist. If the printer does not pass a
step, follow the corresponding troubleshooting suggestions.
Check
Suggested Solutions
Check the power cord and
the power switch.
Check the power source by plugging into another outlet.
Make sure that
is on. In Ready mode,
lights green.
If
lights or blinks green,
go to
"Understanding the Operator Panel LEDs"
.
Press and hold
to print
a demo page.
•
If a demo page does not print,
check the paper supply in the paper
input tray.
•
If the paper jams in the printer,
go to
"Clearing Jams in the Paper
Tray"
.
Check the demo page to
see if it is printed
correctly.
If there is a print quality problem,
go to
"Solving Print Quality Problems"
.
Print a short document
from a software
application to verify that
the computer and printer
are connected and are
communicating correctly.
•
If the page does not print,
check the cable connection between the
printer and the computer.
• Check the print queue or print spooler to see if the printer has been
paused.
• Check the software application to ensure you are using the proper
printer driver and communication port.
If printing is interrupted in
progress,
go to
"Solving General Printing Problems"
.
If completing the checklist
does not resolve the
printer problem,
check the
•
"Solving General Printing Problems"
.
