128
Preparing the Script Files for Deployment Using Embedded Linux
7
Copy the
ks.cfg
file from
/opt/dell/toolkit/template/configs
to the NFS
Share.
8
Edit the file
ks.cfg
. Set the NFS IP Address where RHEL 32-bit images are
available and the NFS share path.
9
Run
export DT_OS_DISK=/dev/sda
, the disk device on which the Dell
Utility partition was created.
10
Run
export DT_OS_SRC=/tmp/os_src
, where
vmlinuz
,
initrd.img
and
ks.cfg
available.
11
Run export
DT_HD=/dev/sda
.
12
From
/opt/dell/toolkit/template/scripts
, run
./lininst.sh
script.
13
After 20 seconds, the server reboots and boots to the GRUB prompt. The
the RHEL 32-bit operating system unattended installation proceeds.
SUSE Linux Enterprise Server Operating Systems
The
suseinst.sh
script is used to install supported SUSE Linux Enterprise
Server operating systems.
NOTE:
While installing Linux, ensure that you install
grub
in the boot partition.
Otherwise, you will not be able to boot to the utility partition by pressing the
F10
key
during reboot.
suseinst.sh
The
suseinst.sh
sample script is used to perform an unattended installation of
a supported SUSE Linux Enterprise Server operating system. The variables
and paths must be specified before the operating system can be installed.
CAUTION:
It is strongly recommended that you consult your SUSE Linux
Enterprise Server operating system documentation and unattended deployment
documentation to develop a thorough understanding of the unattended installation
process before attempting to perform a full scripted deployment.
Summary of Contents for External OEMR 2850
