manualshive.com logo in svg

Dell External OEMR 2850, User Manual

Share
Download
Dell External OEMR 2850 User Manual Download Page 37

Preparing the Directory Structure for Deployment in Microsoft Windows PE

37

iDRAC

Configures iDRAC6.

NOTE: 

This feature may not be supported on all systems.

racadmErrorCodes.txt

Lists the error codes and messages for the 

RACADM.EXE

 

tool. 

RAIDCFG.EXE

Creates and reports Redundant Array of Independent Disks 
(RAID) information.

RaidcfgErrorCodes.txt

Lists the error codes and messages for the 

RAIDCFG.EXE

 

tool. 

stsvc.ini

Configuration file used by 

RAIDCFG.EXE

.

NOTE: 

Do not edit this file. Incorrect edits might cause 

RAIDCFG.EXE

 to fail.

sys.ini

A 

.ini

 file used with 

syscfg.

SYSCFG.EXE

• Reports and configures:

– BIOS settings and options
– BMC settings and options
– RAC 5 settings and options

• Maintains system state between reboots

• Reports hardware devices and other system-related 

information

SyscfgErrorCodes.txt

Lists the error codes and messages for the 

SYSCFG.EXE

 

tool.

sysdrmk.exe

Used by 

UPINIT.BAT

 to patch the boot sector and Master 

Boot Record (MBR).

UpinitErrorCodes.txt

Lists the error codes and messages for 

UPINIT.BAT

.

version.txt

Contains the DTK version in use. 

Table 3-1.

System Utilities and Supporting Files 

(continued)

Toolkit Components

Purpose

Summary of Contents for External OEMR 2850

















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands