Dell External OEMR 2850 User Manual Download Page 59

Page: 59 / 176

Preparing the Script Files for Deployment Using Microsoft Windows PE

SYSCAP.BAT

—

Captures BIOS and
BMC configuration
settings and saves
them to a file.

•

TKENVSET.BAT

— Used by

SYSCAP.BAT

inform the task
scripts where to
find the
DTK utilities,
scripts, and
configuration
files.

•

SYSCFG.EXE

—

Used by

SYSCAP.BAT

configure the
BIOS and BMC
settings.

SYSREP.BAT

—

Applies the BIOS
and BMC settings
saved in a file to the
current system.

•

TKENVSET.BAT

— Used by

SYSREP.BAT

inform the task
scripts where to
find the
DTK utilities,
scripts, and
configuration
files.

•

SYSCFG.EXE

— Used by

SYSREP.BAT

configure the
BIOS and BMC
settings.

W2K8INST.BAT

—

Performs an
unattended
installation of
supported Windows
Server 2008.

•

TKENVSET.BAT

— Used by

W2K8INST.
BAT

to inform

the task scripts
where to find the
DTK utilities,
scripts, and
configuration
files.

•

SETUP.EXE

—

Used by

W2K8INST.
BAT

to install

the operating
system in
conjunction with
the

UNATTEND.

XML

answer file.

•

UNATTEND.

XML

— Used by

W2K8INST.
BAT

conjunction with

SETUP.EXE

install the
operating system
files.

RAIDCFG.BAT

—

Configures the
selected Redundant
Array of Independent
Disks (RAID)
controller detected
in the system.

•

TKENVSET.BAT

— Used by

RAIDCFG.BAT

to inform the task
scripts where to
find the DTK
utilities, scripts,
and configuration
files.

•

RAIDCFG.EXE

— Used by

RAIDCFG.BAT

to retrieve RAID
information and to
configure settings.

Table 4-1.

Scripts For Deployment

(continued)

Capture Scripts

Replication Scripts Deployment Scripts Others

Summary of Contents for External OEMR 2850

















































































































































































Search results

Summary of Contents for External OEMR 2850

Reviews:

Related manuals for External OEMR 2850

Brands by name

Popular brands

Dell External OEMR 2850, User Manual

Search results

Summary of Contents for External OEMR 2850

Reviews:

Related manuals for External OEMR 2850

Brands by name

Popular brands