Dell External OEMR 2850 User Manual Download Page 60

Page: 60 / 176

Preparing the Script Files for Deployment Using Microsoft Windows PE

RAIDCAP.BAT

—

Captures the RAID
settings and saves
them to a file.

•

TKENVSET.BAT

— Used by

RAIDCAP.BAT

to inform the task
scripts where to
find the
DTK utilities,
scripts, and
configuration
files.

•

RAIDCFG.EXE

— Used by

RAIDCAP.BAT

to retrieve RAID
information and
to
configure settings.

RAIDREP.BAT

—

Applies the RAID
settings saved in a
file to the current
system.

•

RAIDCFG.EXE

— Used by

RAIDREP.BAT

to retrieve RAID
information and
to configure
settings.

PARTCFG.BAT

—

Creates and
populates the Dell™
utility partition (UP)
and the operating
system partition on a
specified disk.

•

TKENVSET.BAT

— Used by

PARTCFG.BAT

inform the task
scripts where to
find the DTK
utilities, scripts, and
configuration files.

•

DISKPART.EXE

— Provided by
Windows; this
script is used to
create partitions
on your disk.
When creating a
Windows PE
image, ensure that

DISKPART.EXE

tool

is present

the

Windows PE

image you created.

This script uses
the following files
for noninteractive
(unattended)
operations:

Table 4-1.

Scripts For Deployment

(continued)

Capture Scripts

Replication Scripts Deployment Scripts Others

Summary of Contents for External OEMR 2850

















































































































































































Search results

Summary of Contents for External OEMR 2850

Reviews:

Related manuals for External OEMR 2850

Brands by name

Popular brands

Dell External OEMR 2850, User Manual

Search results

Summary of Contents for External OEMR 2850

Reviews:

Related manuals for External OEMR 2850

Brands by name

Popular brands