manualshive.com logo in svg

Dell External OEMR 2850, User Manual

Share
Download
Dell External OEMR 2850 User Manual Download Page 126

126

Preparing the Script Files for Deployment Using Embedded Linux

Preparing the Operating System Installation Scripts

Red Hat Enterprise Linux Server Operating Systems

The 

lininst.sh

 script is used to install supported Red Hat Enterprise Linux 

Server operating systems.

 

NOTE: 

While installing Linux, ensure that you install 

grub

 in the boot partition. 

Otherwise, you will not be able to boot to the utility partition by pressing the 

F10

 key 

during reboot. 

lininst.sh 

The 

lininst.sh

 sample script is used to perform an unattended installation of 

a supported Red Hat Enterprise Linux Server operating system. The variables 
and paths must be specified before the operating system can be installed.

 

CAUTION: 

It is strongly recommended that you consult your Red Hat Enterprise 

Linux Server operating system documentation and unattended deployment 
documentation to develop a thorough understanding of the unattended installation 
process before attempting to perform a full scripted deployment. 

Utilities Used

grub

 — Used in conjunction with the 

kernel image

 and 

initial ramdisk

 files, 

along with the 

unattended

 answer file to install the operating system.

Variables Used

•

DT_OS_DISK

 — Sets the disk on which to deploy the 

Red Hat 

Enterprise Linux Server operating system.

•

DT_OS_SRC

 — Sets the location from where to copy the 

kernel image

 

and 

initial ramdisk

 files. 

External Dependencies

The 

DT_PLATFORM

 variable is set during deployment by 

tkenvset.sh

 using 

platform discovery. 

The 

lininst.sh

 script uses the 

unattended answer

 file in conjunction with the 

grub

 utility and 

kernel image

 and 

initial ramdisk

 files to install the operating 

system files. See "ks.cfg (for Red Hat Enterprise Linux Server Version 4) and 
ks-rhel5.cfg (for Red Hat Enterprise Linux Server Version 5)" for more 
information about preparing the 

unattended answer

 file.

Summary of Contents for External OEMR 2850

















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands