manualshive.com logo in svg

Dell External OEMR 2850, User Manual

Share
Download
Dell External OEMR 2850 User Manual Download Page 147

Known Issues and Frequently Asked Questions

147

Q:

 Can we use the same sample scripts that we have from earlier versions of 

DTK?

A:

 The scripts written for the previous versions (2.x) of DTK will not work in 

DTK 3.x versions for embedded Linux. See the directory 

/opt/dell/toolkit/template/scripts

 

for the sample scripts. 

Q:

 After I install a legacy operating system on a newer Dell system, the Linux 

kernel does not boot and panics.

A:

 After installing the initial ramdisk image, you could install the driver or 

you could update to a newer version of the kernel. 

Q:

 After the DTK deployment is complete, the Red Hat

®

 Enterprise Linux

®

 

Server installation keeps going into attended mode or halts with the message 

ks.cfg not found

.

A: 

Always use 

initrd

 for the Red Hat Enterprise Linux Server installation 

from the Dell Systems Build and Update Utility

 

available on the path 

server_assistant/drivers 

on the 

Dell Systems Management Tools and 

Documentation

 DVD.

If the 

initrd

 is not available for your operating system, try the latest update of 

Red Hat Enterprise Linux Server. Otherwise, you might need to prepare 
driver disks for your network or disk controller. Use the drivers from the 
Systems Build and Update Utility

 available on 

the path 

server_assistant/drivers  

on the 

Dell Systems Management Tools and 

Documentation

 DVD

. 

Windows PE Questions

Q:

 My system gets the error 

Illegal or Missing File Types 

Specified in Section Files.SCSI.Name

 

during an unattended 

installation of a supported Windows operating system on supported Dell 
systems.

A: 

This behavior can occur when the line in the 

Txtsetup.oem

 file under the 

[Files.SCSI.

name

] heading is not a supported file type. To resolve this 

behavior, you must remove the line in the 

Txtsetup.oem

 file. The dynamic-

link library (DLL) file can be copied to the correct location of the installation 
by placing it in the 

I386\$Oem$\$$\OEMDIR

 folder. (

OEMDIR

 is the 

destination folder where the file would normally be located, if installed to a 
running operating system. For example, INF files are normally found in the 

%SystemRoot%\INF

 folder. The correct 

OEMDIR

 destination can be found 

Summary of Contents for External OEMR 2850

















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands