Dell External OEMR 2850 User Manual Download

Page: 62 / 176

Preparing the Script Files for Deployment Using Microsoft Windows PE

UPINIT.BAT

—

Creates and
populates the Dell
utility partition.

NOTE:

Do not make

any modifications to
the

UPINIT.BAT

script.

•

TKENVSET.BAT

— Used by

UPINIT.BAT

inform the task
scripts where to find
the DTK utilities,
scripts, and
configuration files.

•

DISKPART.EXE

— Provided by
Windows, it is
used to create
partitions on your
disk.

•

UNZIP.EXE

—

Used by

UPINIT.BAT

unzip the contents
of

UPIMG

BIN

•

FORMAT.EXE

—

Provided by
Windows to format
the partition.

Table 4-1.

Scripts For Deployment

(continued)

Capture Scripts

Replication Scripts Deployment Scripts Others

Summary of Contents for External OEMR 2850

















































































































































































Search results

Summary of Contents for External OEMR 2850

Reviews:

Related manuals for External OEMR 2850

Brands by name

Popular brands

Dell External OEMR 2850, User Manual

Search results

Summary of Contents for External OEMR 2850

Reviews:

Related manuals for External OEMR 2850

Brands by name

Popular brands