manualshive.com logo in svg

Dell External OEMR 2850, User Manual

Share
Download
Dell External OEMR 2850 User Manual Download Page 111

Preparing the Script Files for Deployment Using Embedded Linux

111

Table 8-1.

Scripts For Deployment

Capture Scripts

Replication Scripts

Deployment Scripts Others

raccap.sh

 — 

Captures RAC 
settings to a file for 
Dell™ Remote 
Access Controller 
(DRAC) 4.

•

tkenvset.sh

 — 

Used by 

raccap.sh 

to inform the task 
scripts where to 
find the DTK 
utilities, scripts, 
and configuration 
files.

•

racadm

 — Used by 

raccap.sh 

to 

retrieve RAC 
information and to 
configure settings. 
The wrapper 
script, 

racadm

, 

calls 

racadm3

 or 

racadm4

 

depending on the 
system 
configuration.

•

syscfg

 — Used by 

raccap.sh

 to 

configure DRAC 5. 

racrep.sh

 — Applies 

the RAC 
configuration 
settings saved in a 
file to the current 
system.

•

tkenvset.sh

 — 

Used by 

racrep.sh 

to inform the task 
scripts where to 
find the DTK 
utilities, scripts, 
and configuration 
files.

•

racadm

 — Used by 

racrep.sh 

to 

replicate RAC 
information and to 
configure settings. 

racadm

 is the 

wrapper script 
which calls 

racadm3

 or 

racadm4

 

depending on the 
system 
configuration.

•

syscfg

 — Used by 

racrep.sh

 to 

configure DRAC5. 

lininst.sh

 — 

Performs an 
unattended 
installation of a 
supported Red Hat

®

 

Enterprise Linux

®

 

Server operating 
system.

•

tkenvset.sh

 — 

Used by 

lininst.sh 

to 

inform the task 
scripts where to 
find the DTK 
utilities, scripts, 
and 
configuration 
files.

•

grub

 — Used to 

install the 
operating system 
in conjunction 
with the 

unattended 
answer 

file. It 

also uses the 
following images 
in conjunction 
with the 

unattended 
answer

 file to 

perform 
unattended 
operations:

tkenvset.sh 

— Sets 

the path of the 
DTK installation 
and variables for 
the system to be 
deployed and 
configured. The 
variables and paths 
specified in this 
file must be 
specified before 
any of the other 
supporting scripts 
can be used.

•

syscfg

 — Used 

by 

tkenvset.sh 

to 

discover the 
system type.

Summary of Contents for External OEMR 2850

















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands