Figure 53. Removing the screws from the backplane
2. Hold the backplane by the edges and remove it from the bay.
Figure 54. Removing bay 2 backplane
Next steps
Replace the drive bay 2 backplane
.
Installing the drive bay 2 backplane
Prerequisites
1. Follow the safety guidelines listed in
2. Power off the system and all attached peripherals.
3. Disconnect the system from the electrical outlet, and disconnect the peripherals.
4. Ensure that all internal cables are routed correctly and connected, and no tools or extra parts are left inside the system.
5. If installed,
6.
7. Remove the
8. Remove the system from the rack and place it on an ESD work bench. For more information, see the
Rail Installation Guide
at
9.
.
Installing and removing system components
71
