The
TPM Status
changes to
Enabled, Activated
.
Initializing the TPM 1.2 for TXT users
Steps
1. While booting your system, press F2 to enter System Setup.
2. On the
System Setup Main Menu
screen, click
System BIOS
>
System Security Settings
.
3. From the
TPM Security
option, select
On with Pre-boot Measurements
.
4. From the
TPM Command
option, select
Activate
.
5. Save the settings.
6. Restart your system.
7. Enter
System Setup
again.
8. On the
System Setup Main Menu
screen, click
System BIOS
>
System Security Settings
.
9. From the
Intel TXT
option, select
On
.
Initializing the TPM 2.0 for TXT users
Steps
1. While booting your system, press F2 to enter System Setup.
2. On the
System Setup Main Menu
screen, click
System BIOS
>
System Security Settings
.
3. From the
TPM Security
option, select
On
.
4. Save the settings.
5. Restart your system.
6. Enter
System Setup
again.
7. On the
System Setup Main Menu
screen, click
System BIOS
>
System Security Settings
.
8. Select the
TPM Advanced Settings
option.
9. From the
TPM2 Algorithm Selection
option, select
SHA256
, then go back to
System Security Settings
screen.
10. On the
System Security Settings
screen, from the
Intel TXT
option, select
On
.
11. Save the settings.
12. Restart your system.
Cable chain assembly
Removing cable chain assembly
Prerequisites
1. Follow the safety guidelines listed in
2. Power off the system and all attached peripherals.
3. Disconnect the system from the electrical outlet, and disconnect the peripherals.
4.
5. Remove the
6. Remove the system from the rack and place it on an ESD work bench. For more information, see the
Rail Installation Guide
at
7.
.
8. If installed,
9. Remove the following:
a.
.
b.
c.
.
122
Installing and removing system components
