Figure 21. Installing the expansion card riser assembly
Next steps
1
into the enclosure.
2
Follow the procedure listed in
After working inside your system
.
Removing an expansion card
Prerequisites
1
Follow the safety guidelines listed in
2
Follow the procedure listed in
Before working inside your system
.
3
from the enclosure.
4
Remove the expansion card riser assembly
Steps
1
Remove the screw that secures the expansion card to the assembly.
2
Hold the expansion card by its edges, and carefully remove it from the riser card.
NOTE:
You must install an expansion card filler bracket over an empty expansion slot to maintain Federal Communications
Commission (FCC) certification of the system. The brackets also keep dust and dirt out of the system and aid in proper
cooling and airflow inside the system.
64
Installing and removing system components
Summary of Contents for E43S Series
Page 11: ...5 iDRAC MAC address information label XC6420 Series overview 11 ...
Page 51: ...Figure 9 Removing a sled Installing and removing system components 51 ...
Page 53: ...Figure 11 Installing a sled Installing and removing system components 53 ...
Page 65: ...Figure 22 Removing an expansion card Installing and removing system components 65 ...
