manualshive.com logo in svg

Dell E43S Series, Installation And Service Manual

Share
Download
Dell E43S Series Installation And Service Manual Download Page 34

Option

Description

For 

AHCI

 or 

RAID

 mode, BIOS support is always enabled.

Option

Description

Model

Specifies the drive model of the selected device.

Drive Type

Specifies the type of drive attached to the SATA port.

Capacity

Specifies the total capacity of the hard drive. This field is undefined for removable media 
devices such as optical drives.

Port D

Sets the drive type of the selected device. For the 

Embedded SATA settings

 in 

ATA

 mode, set this field to 

Auto

 to 

enable BIOS support. Set it to 

OFF

 to turn off BIOS support.

For 

AHCI

 or 

RAID

 mode, BIOS support is always enabled.

Option

Description

Model

Specifies the drive model of the selected device.

Drive Type

Specifies the type of drive attached to the SATA port.

Capacity

Specifies the total capacity of the hard drive. This field is undefined for removable media 
devices such as optical drives.

Port E

Sets the drive type of the selected device. For the 

Embedded SATA settings

 in 

ATA

 mode, set this field to 

Auto

 to 

enable BIOS support. Set it to 

OFF

 to turn off BIOS support.

For 

AHCI

 or 

RAID

 mode, BIOS support is always enabled.

Option

Description

Model

Specifies the drive model of the selected device.

Drive Type

Specifies the type of drive attached to the SATA port.

Capacity

Specifies the total capacity of the hard drive. This field is undefined for removable media 
devices such as optical drives.

Port F

Sets the drive type of the selected device. For the 

Embedded SATA settings

 in 

ATA

 mode, set this field to 

Auto

 to 

enable BIOS support. Set it to 

OFF

 to turn off BIOS support.

For 

AHCI

 or 

RAID

 mode, BIOS support is always enabled.

Option

Description

Model

Specifies the drive model of the selected device.

Drive Type

Specifies the type of drive attached to the SATA port.

Capacity

Specifies the total capacity of the hard drive. This field is undefined for removable media 
devices such as optical drives.

Port G

Sets the drive type of the selected device. For the 

Embedded SATA settings

 in 

ATA

 mode, set this field to 

Auto

 to 

enable BIOS support. Set it to 

OFF

 to turn off BIOS support.

For 

AHCI

 or 

RAID

 mode, BIOS support is always enabled.

Option

Description

Model

Specifies the drive model of the selected device.

Drive Type

Specifies the type of drive attached to the SATA port.

34

Pre-operating system management applications

Summary of Contents for E43S Series




































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands