Dell E43S Series, Installation And Service Manual

Page: 30 / 99

Option Description
System BIOS
Version Specifies the BIOS version installed on the system.
System
Management
Engine Version Specifies the current version of the Management Engine firmware.
System Service Tag Specifies the system Service Tag.
System
Manufacturer Specifies the name of the system manufacturer.
System
Manufacturer
Contact
Information Specifies the contact information of the system manufacturer.
System CPLD
Version Specifies the current version of the system complex programmable logic device (CPLD) firmware.
UEFI Compliance
Version Specifies the UEFI compliance level of the system firmware.
Memory Settings
You can use the Memory Settings screen to view all the memory settings and enable or disable specific memory functions, such as system
memory testing and node interleaving.
NOTE: The XC Series system does not support the NVDIMM-N, RAID, or UEFI settings.
Viewing Memory Settings
To view the Memory Settings screen, perform the following steps:
1 Turn on, or restart your system.
2 Press F2 immediately after you see the following message:
F2 = System Setup
NOTE: If your operating system begins to load before you press F2, wait for the system to finish booting, and then restart
your system and try again.
3 On the System Setup Main Menu screen, click System BIOS .
4 On the System BIOS screen, click Memory Settings .
Memory Settings details
The Memory Settings screen details are explained as follows:
Option Description
System Memory
Size Specifies the memory size in the system.
System Memory
Type Specifies the type of memory installed in the system.
System Memory
Speed Specifies the system memory speed.
30 Pre-operating system management applications