Dell E43S Series, Installation And Service Manual

Page: 28 / 99

System Setup details
The System Setup Main Menu screen details are explained as follows:
NOTE: The XC Series system does not support the NVDIMM-N, RAID, or UEFI settings.
Option Description
System BIOS Enables you to configure BIOS settings.
iDRAC Settings Enables you to configure the iDRAC settings.
The iDRAC settings utility is an interface to set up and configure the iDRAC parameters by using UEFI (Unified
Extensible Firmware Interface). You can enable or disable various iDRAC parameters by using the iDRAC settings
utility. For more information about this utility, see
Integrated Dell Remote Access Controller User’s Guide at
Dell.com/idracmanuals .
Device Settings Enables you to configure device settings.
System BIOS
You can use the System BIOS screen to edit specific functions such as boot order, system password, setup password, PCIe NVMe RAID
mode, and set the SATA enable or disable USB ports.
NOTE: The XC Series system does not support the NVDIMM-N, RAID, or UEFI settings.
Viewing System BIOS
To view the System BIOS screen, perform the following steps:
1 Turn on, or restart your system.
2 Press F2 immediately after you see the following message:
F2 = System Setup
NOTE: If your operating system begins to load before you press F2, wait for the system to finish booting, and then restart
your system and try again.
3 On the System Setup Main Menu screen, click System BIOS .
System BIOS Settings details
NOTE: The XC Series system does not support the NVDIMM-N, RAID, or UEFI settings.
The System BIOS Settings screen details are explained as follows:
Option Description
System Information Specifies information about the system such as the system model name, BIOS version, and Service Tag.
Memory Settings Specifies information and options related to the installed memory.
Processor Settings Specifies information and options related to the processor such as speed and cache size.
SATA Settings Specifies options to enable or disable the integrated SATA controller and ports.
28 Pre-operating system management applications