Option
Description
NVMe Settings
Specifies options to change the NVMe settings. If the system contains the NVMe drives that you want to
configure in a RAID array, you must set this field and the
Embedded SATA
field on the
SATA Settings
menu to
RAID
mode. You might also need to change the
Boot Mode
setting to
UEFI
. Otherwise, you should set this field to
Non-RAID
mode.
Boot Settings
Allows you to set the boot mode — BIOS or UEFI.
Network Settings
Specifies options to manage the UEFI network settings and boot protocols.
Legacy network settings are managed from the
Device Settings
menu.
Integrated Devices
Specifies options to manage integrated device controllers and ports, specifies related features and options.
Serial
Communication
Specifies options to manage the serial ports, related features and options.
System Profile
Settings
Specifies options to change the processor power management settings, memory frequency.
System Security
Specifies options to configure the system security settings, such as system password, setup password, Trusted
Platform Module (TPM) security, and UEFI secure boot. It also manages the power button on the system.
Redundant OS
Settings
Specifies the options to configure the Redundant OS settings.
Miscellaneous
Settings
Specifies options to change the system date and time.
System Information
You can use the
System Information
screen to view system properties such as Service Tag, system model name, and the BIOS version.
NOTE:
The XC Series system does not support the NVDIMM-N, RAID, or UEFI settings.
Viewing System Information
To view the
System Information
screen, perform the following steps:
1
Turn on, or restart your system.
2
Press F2 immediately after you see the following message:
F2 = System Setup
NOTE:
If your operating system begins to load before you press F2, wait for the system to finish booting, and then restart
your system and try again.
3
On the
System Setup Main Menu
screen, click
System BIOS
.
4
On the
System BIOS
screen, click
System Information
.
System Information details
NOTE:
The XC Series system does not support the NVDIMM-N, RAID, or UEFI settings.
The
System Information
screen details are explained as follows:
Option
Description
System Model
Name
Specifies the system model name.
Pre-operating system management applications
29
Summary of Contents for E43S Series
Page 11: ...5 iDRAC MAC address information label XC6420 Series overview 11 ...
Page 51: ...Figure 9 Removing a sled Installing and removing system components 51 ...
Page 53: ...Figure 11 Installing a sled Installing and removing system components 53 ...
Page 65: ...Figure 22 Removing an expansion card Installing and removing system components 65 ...
