Steps
1. Align the internal hard-drive bay with the tabs on the chassis and slide the internal hard drive bay into the chassis.
2. Secure the internal hard drive bay to the chassis using the two captive screws.
Next steps
1. Connect the data and power cables to the hard drive(s).
2. Follow the procedure listed in the After working inside your system section.
Removing a cabled drive
Prerequisites
1. Follow the safety guidelines listed in
.
2. Keep the Phillips #2 screwdriver ready.
3. Follow the procedure listed in
Before working inside your system
4. Remove the internal drive bay.
Steps
1. Remove the four screws securing the drive to the internal drive bay.
2. Remove the hard drive from the internal drive bay.
Figure 42. Removing a cabled drive
1. spare screws
2. drive connector
3. drive
4. internal hard-drive bay
5. screws (4)
96
Installing and removing system components
