Figure 54. Installing the four-slot hard drive blank
a. four-slot hard drive blank
b. release tab (4)
Next steps
1. Follow the procedure listed in the After working inside your system section.
System memory
Your system supports DDR4 registered DIMMs (RDIMMs). It supports DDR4 voltage specifications.
NOTE:
MT/s indicates DIMM speed in MegaTransfers per second.
Memory bus operating frequency can be 2400 MT/s, 2133 MT/s, or 1866 MT/s depending on:
●
System profile selected (for example, Performance Optimized, Custom, or Dense Configuration Optimized)
●
Maximum supported DIMM frequency of the processors
Your system contains 12 memory sockets split into four sets— two sets of 4 sockets and two sets of 2 sockets each. DIMMs
in sockets A1 to A8 are assigned to processor 1 and DIMMs in sockets B1 to B4 are assigned to processor 2. Each 4-socket set
is organized into two channels and each 2–socket set is organized into one channel. In each channel of the 4-socket set, the
release levers of the first socket are marked white and those of the second socket are marked black. In the 2-socket set, each
release lever is marked white.
Installing and removing system components
107
