Steps
1. Using a screwdriver, push the release tabs on the corners of the blank from inside the system, to unlock the four-slot hard
drive blank from the chassis.
2. From the front of the system, pull the four-slot hard drive blank at the corners until it is free of the hard drive slot.
Figure 53. Removing the four-slot hard drive blank
a. four-slot hard drive blank
b. release tab (4)
c. screwdriver
Next steps
1. Install the four-slot hard drive blank.
2. Follow the procedure listed in the After working inside your system section.
Installing a four-slot hard drive blank
Prerequisites
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
Steps
1. Locate the hard drive slots numbered from four to seven.
2. Insert the four-slot hard drive blank into the hard drive slot, and push it until the release tabs click into place.
106
Installing and removing system components
