Dell E30S Series, Owner'S Manual

Page: 47 / 194

2. Press F2 immediately after you see the following message:
F2 = System Setup
NOTE:
If your operating system begins to load before you press F2, wait for the system to finish booting, and then
restart your system and try again.
3. On the
System Setup Main Menu
screen, click
System BIOS
.
4. On the
System BIOS
screen, click
Network Settings
.
Related references
Network Settings on page 46
Network Settings screen details on page 47
Network Settings screen details
The
Network Settings
screen details are explained as follows:
About this task
Option Description
PXE Device n (n
= 1 to 4)
Enables or disables the device. When enabled, a UEFI boot option is created for the device.
PXE Device n
Settings(n = 1 to
4)
Enables you to control the configuration of the PXE device.
Related references
Network Settings on page 46
Related tasks
Viewing Network Settings on page 46
UEFI iSCSI Settings details
The
UEFI ISCSI Settings
screen details are explained as follows:
Option Description
ISCSI Initiator
Name
Specifies the name of the iSCSI initiator (iqn format).
ISCSI Device n (n
= 1 to 4)
Enables or disables the iSCSI device. When disabled, a UEFI boot option is created for the iSCSI device
automatically.
Viewing UEFI iSCSI Settings
To view the
UEFI iSCSI Settings
screen, perform the following steps:
Steps
1. Turn on, or restart your system.
2. Press F2 immediately after you see the following message:
F2 = System Setup
Pre-operating system management applications 47