Dell Dimension E520 Owner'S Manual Download Page 93

Page: 93 / 162

Removing and Installing Parts

Floppy Drive

CAUTION:

Before you begin any of the procedures in this section, follow the safety instructions in the

Product

Information Guide

CAUTION:

To guard against electrical shock, always unplug your computer from the electrical outlet before

removing the cover.

NOTE:

If you are adding a floppy drive, see "Installing a Floppy Drive" on page 94.

Removing a Floppy Drive

Follow the procedures in "Before You Begin" on page 59.

Remove the drive panel (see "Removing the Drive Panel" on page 83).

Disconnect the power and data cables from the back of the floppy drive.

NOTE:

If you have installed a PCI Express x16 card, this card may cover the floppy-drive connectors. Remove this

card before connecting the floppy-drive cables.

Slide the drive latch release toward the bottom of the computer and, without releasing the drive latch
release, slide the floppy drive out through the front of the computer.

power cable

data cable

Summary of Contents for Dimension E520



































































































































































Search results

Summary of Contents for Dimension E520

Reviews:

Related manuals for Dimension E520

Brands by name

Popular brands

Dell Dimension E520, Owner'S Manual

Search results

Summary of Contents for Dimension E520

Reviews:

Related manuals for Dimension E520

Brands by name

Popular brands