Dell Dimension E520 Owner'S Manual Download Page 91

Page: 91 / 162

Removing and Installing Parts

Check all connectors to be certain that they are properly cabled and firmly seated.

Replace the computer cover (see "Replacing the Computer Cover" on page 106).

NOTICE:

To connect a network cable, first plug the cable into the network port or device and then plug it into the

computer.

Connect your computer and devices to electrical outlets, and turn them on.

See the documentation that came with the drive for instructions on installing any software required for
drive operation.

Adding a Second Hard Drive

CAUTION:

Before you begin any of the procedures in this section, follow the safety instructions in the

Product

Information Guide

CAUTION:

To guard against electrical shock, always unplug your computer from the electrical outlet before

removing the cover.

serial ATA data cable

power cable

Summary of Contents for Dimension E520



































































































































































Search results

Summary of Contents for Dimension E520

Reviews:

Related manuals for Dimension E520

Brands by name

Popular brands

Dell Dimension E520, Owner'S Manual

Search results

Summary of Contents for Dimension E520

Reviews:

Related manuals for Dimension E520

Brands by name

Popular brands