manualshive.com logo in svg

Dell Dimension 4500S, Owner'S Manual, Page: 61 / 132

Share
Download
Dell Dimension 4500S Owner'S Manual Download Page 61

A d d i n g   Pa r t s

61

Back View

4

1

10

9

6

8

7

2

12

13

5

11

3

1

parallel connector

Connect a parallel device, such as a printer, to the parallel connector. If you have a 
USB printer, plug it into a USB connector.

2

mouse connector

Plug a standard mouse into the green mouse connector. Turn off the computer 
and any attached devices before you connect a mouse to the computer. If you have 
a USB mouse, plug it into a USB connector. 

3

card slots

The slots for PCI cards.

4

power connector

The connection for the power cable.

5

voltage selection switch 
(may not be available on 
all computers)

Your computer is equipped with either a fixed-voltage power supply, an auto-
sensing voltage circuit, or a manual voltage selection switch.  See "Safety 
Instructions" on page 7 for more information. 

6

line-in connector

Use the blue line-in connector (available on computers with integrated sound) to 
attach a record/playback device such as a cassette player, CD player, or VCR.

On computers with a sound card, the line-in connector is on the card.

Summary of Contents for Dimension 4500S





































































































































Reviews:

No comments