Adding and Replacing Parts: Dell Latitude D620 User's Guide
NOTICE:
Use firm and even pressure to slide the drive into place. If you use excessive force, you may
damage the connector.
5. Slide the hard drive into the bay until it is fully seated.
6. Replace and tighten the two screws.
7. Use the
Operating System
CD to install the operating system for your computer (see
Using the
Operating System CD
).
8. Use the
Drivers and Utilities
CD to install the drivers and utilities for your computer (see
Reinstalling
Drivers and Utilities
).
Media Bay
NOTE:
If the device security screw is not present, you can remove and install devices while the
computer is running and connected to a docking device (docked).
Removing Media Bay Devices
NOTICE:
To prevent damage to devices, store them in a safe, dry place when they are not installed in
the computer. Avoid pressing down on them or placing heavy objects on top of them.
1. If present, remove the device security screw from the bottom of the computer.
2. If the computer is running, double-click the
Safely Remove Hardware
icon on the taskbar, click the
device you want to eject, and click
Stop
.
3. Press the device latch release.
file:///S|/Integration%20Specialist/Hardware%20Docu...ation/Kim%20&%20Jay/Dell%20Laptops/D620UG/parts.htm (23 of 24) [12/4/2008 10:54:20 AM]
