Dell D32M Service Manual Download Page 22

Page: 22 / 110

Removing the secondary 2.5-inch hard drive assembly

Prerequisites

1. Follow the procedure in

before working inside your computer

2. Remove the

side cover

About this task

The following images indicate the location of the 2.5-inch hard drive and provide a visual representation of the removal
procedure.

Steps

1. Disconnect the power cable and the black hard drive data cable from the connectors on the 2.5-inch hard drive.

NOTE:

For secondary 2.5-inch hard drive, the other end of the black hard drive data cable is connected to the SATA1

and SATA2 connectors on the system board.

2. Press the release tabs on the hard drive bracket and slide the hard drive assembly out of the hard drive bracket.
3. Lift the hard drive assembly from the computer.

NOTE:

The orientation of the hard drive so that you can replace it correctly.

Removing the 2.5-inch hard drive bracket

Prerequisites

1. Follow the procedure in

before working inside your computer

2. Remove the

side cover

3. Remove the

2.5-inch primary hard drive

About this task

The following images indicate the location of the hard drive bracket and provide a visual representation of the removal
procedure.

Removing and installing components

Summary of Contents for D32M















































































































Search results

Summary of Contents for D32M

Reviews:

Related manuals for D32M

Brands by name

Popular brands

Dell D32M, Service Manual

Search results

Summary of Contents for D32M

Reviews:

Related manuals for D32M

Brands by name

Popular brands