Dell D32M Service Manual Download Page 94

Page: 94 / 110

Table 5. System setup options—System information menu (continued)

Overview

DIMM 1 Size

Displays the DIMM 1 memory size.

DIMM 2 Size

Displays the DIMM 2 memory size.

DIMM 3 Size

Displays the DIMM 3 memory size.

DIMM 4 Size

Displays the DIMM 4 memory size.

Devices Information

Video Controller

Displays the video controller type of the computer.

Video Memory

Displays the video memory information of the computer.

Wi-Fi Device

Displays the wireless device information of the computer.

Native Resolution

Displays the native resolution of the computer.

Video BIOS Version

Displays the video BIOS version of the computer.

Audio Controller

Displays the audio controller information of the computer.

Bluetooth Device

Displays the Bluetooth device information of the computer.

LOM MAC Address

Displays the LAN On Motherboard (LOM) MAC address of the computer.

dGPU Video Controller

Displays the discrete video controller type of the computer.

Slot 1

Displays the PCIe information of the computer.

Slot 2

Displays the PCIe information of the computer.

Slot 3

Displays the PCIe information of the computer.

Slot 4

Displays the PCIe information of the computer.

Table 6. System setup options—Boot Configuration menu

Boot Configuration

Boot Sequence

Boot Mode: UEFI only

Displays the boot mode.

Boot Sequence

Displays the boot sequence.

Secure Digital (SD) Card Boot

Enable or disable the SD card read-only boot.

By default, the

Secure Digital (SD) Card Boot

option is not enabled.

Secure Boot

Enable Secure Boot

Enable or disable the secure boot feature.

By default, the option is not enabled.

Secure Boot Mode

Enable or disable to change the secure boot mode options.

By default, the

Deployed Mode

is enabled.

Expert Key Management

Enable Custom Mode

Enable or disable custom mode.

By default, the

custom mode

option is not enabled.

Custom Mode Key Management

Select the custom values for expert key management.

Table 7. System setup options—Integrated Devices menu

Integrated Devices

Date/Time

Displays the current date in MM/DD/YYYY format and current time in
HH:MM:SS AM/PM format.

BIOS setup

Summary of Contents for D32M















































































































Search results

Summary of Contents for D32M

Reviews:

Related manuals for D32M

Brands by name

Popular brands

Dell D32M, Service Manual

Search results

Summary of Contents for D32M

Reviews:

Related manuals for D32M

Brands by name

Popular brands