Table 12. System setup options—Security menu (continued)
Security
By default, the
SHA-256
option is enabled.
Clear
Enables to clear the TPM owner information and returns the TPM to the
default state.
By default, the
Clear
option is disabled.
PPI ByPass for Clear Commands
Controls the TPM Physical Presence Interface (PPI).
By default, the
PPI ByPass for clear Commands
option is disabled.
Chassis intrusion
Controls the chassis intrusion feature.
By default, the option is disabled.
SMM Security Mitigation
Enable or disable SMM Security Mitigation.
By default, the option is enabled.
Data Wipe on Next Boot
Start Data Wipe
Enable or disable the data wipe on next boot.
By default, the option is disabled.
Absolute
Enable or disable or permanently disable the BIOS module interface of the
optional Absolute Persistence Module service from Absolute software.
By default, the
Enable Absolute
option is enabled.
UEFI Boot Path Security
Controls whether or not the computer will prompt the user to enter the admin
password (if set) when booting to a UEFI boot device from the F12 boot menu.
By default, the
Always Except Internal HDD
option is enabled.
Table 13. System setup options—Passwords menu
Passwords
Admin Password
Set, change, or delete the administrator password.
System Password
Set, change, or delete the computer password.
Internal HDD-0 Password
Set, change, or delete the Internal HDD-0 password.
NVMe SSD0
Set, change, or delete the NVMe SSD0 password.
Password Configuration
Upper Case Letter
Reinforces password must have at least one upper case letter.
By default, the option is disabled.
Lower Case Letter
Reinforces password must have at least one lower case letter.
By default, the option is disabled.
Digit
Reinforces password must have at least one digit.
By default, the option is disabled.
Special Character
Reinforces password must have at least one special character.
By default, the option is disabled.
Minimum Characters
Set the minimum characters allowed for password.
Password Bypass
When enabled, this always prompts for computer and internal hard drive
passwords when powered on from the off state.
By default, the
Disabled
option is enabled.
Password Changes
98
BIOS setup
Summary of Contents for D32M
