Dell D32M, Service Manual

Page: 76 / 110

Steps
1. To remove the dummy metal bracket, insert a flat-head screwdriver in the hole of the bracket, push the bracket to release
the bracket, and then lift the bracket out from the system.
2. Insert the optional HDMI module into its slot from the inside of your computer.
3. Connect the HDMI module cable to the connector on the system board .
4. Replace the two (M3X3) screws to secure the optional HDMI module to the system.
Next steps
1. Install the front bezel .
2. Install the side cover .
3. Follow the procedure in after working inside your computer .
76 Removing and installing components