Dell D32M, Service Manual

Page: 105 / 110

Steps
1. In the System BIOS or System Setup screen, select System Security and press Enter.
The System Security screen is displayed.
2. In the System Security screen, verify that Password Status is Unlocked .
3. Select System Password , update, or delete the existing system password, and press Enter or Tab.
4. Select Setup Password , update, or delete the existing setup password, and press Enter or Tab.
NOTE: If you change the System and/or Setup password, reenter the new password when prompted. If you delete the
System and/or Setup password, confirm the deletion when prompted.
5. Press Esc and a message prompts you to save the changes.
6. Press Y to save the changes and exit from System Setup.
The computer restarts.
Clearing CMOS settings
About this task
CAUTION: Clearing CMOS settings reset the BIOS settings on your computer.
Steps
1. Remove the side cover .
2. Disconnect the battery cable from the system board.
3. Remove the
coin-cell battery .
4. Wait for one minute.
5. Replace the
coin-cell battery .
6. Connect the battery cable to the system board.
7. Replace the
side cover .
Clearing BIOS (System Setup) and System passwords
About this task
To clear the system or BIOS passwords, contact Dell technical support as described at www.dell.com/contactdell .
NOTE: For information on how to reset Windows or application passwords, refer to the documentation accompanying
Windows or your application.
BIOS setup 105