Dell D32M Service Manual Download Page 99 | Manualshive

Page: 99 / 110

background image

Table 13. System setup options—Passwords menu (continued)

Passwords

Enable Non-Admin Password Changes

Enable or disable to change computer and hard drive password without the
need for admin password.

By default, the option is enabled.

Admin Setup Lockout

Enable Admin Setup Lockout

Enables administrators control over how their users can or cannot access BIOS
setup.

By default, the option is disabled.

Master Password Lockout

Enable Master Password Lockout

When enabled, this will disable the master password support.

By default, the option is disabled.

Allow Non-Admin PSID Revert

Enable Allow Non-Admin PSID Revert

Controls access to the Physical Security ID (PSID) revert of NVMe hard-drives
from the Dell Security Manager prompt.

By default, the option is disabled.

Table 14. System setup options—Update, Recovery menu

Update, Recovery

UEFI Capsule Firmware Updates

Enable or disable BIOS updates through UEFI capsule update packages.

By default, the option is enabled.

BIOS Recovery from Hard Drive

Enables the user to recover from certain corrupted BIOS conditions from a
recovery file on the user primary hard drive or an external USB key.

By default, the option is enabled.

BIOS Downgrade

Allow BIOS Downgrade

Enable or disable the flashing of the computer firmware to previous revision is
blocked.

By default, the option is enabled.

SupportAssist OS Recovery

Enable or disable the boot flow for SupportAssist OS Recovery tool in the
event of certain computer errors.

By default, the option is enabled.

BIOSConnect

Enable or disable cloud Service OS recovery if the main operating system fails
to boot with the number of failures equal to or greater than the value specified
by the Auto OS Recovery Threshold setup option and local Service OS does not
boot or is not installed.

By default, the option is enabled.

Dell Auto OS Recovery Threshold

Controls the automatic boot flow for SupportAssist System Resolution Console
and for Dell OS Recovery Tool.

By default, the threshold value is set to 2.

Table 15. System setup options—System Management menu

System Management

Service Tag

Display the Service Tag of the computer.

Asset Tag

Create a computer Asset Tag.

BIOS setup

99

«
...
97
98
99
100
101
...
»

Summary of Contents for D32M















































































































Reviews:

No comments

Related manuals for D32M

Brand: Panasonic Pages: 24

Brand: Panasonic Pages: 8

Brand: Samsung Pages: 145

SmartCraft SC5000

Brand: Mercury Pages: 64

TRS-80 Color Computer 2

Brand: Radio Shack Pages: 44

Brand: ZIEHL-ABEGG Pages: 84

Brand: 7starlake Pages: 48

DeviceEdge Mini AIE-C011

Brand: Aetina Pages: 14

Brand: IBM Pages: 167

Brand: Dell Pages: 165

PCV-W700G - VAIO - 512 MB RAM

Brand: Sony Pages: 1

SVE11113FXW VAIO

Brand: Sony Pages: 2

PCV-W30 VAIO User Guide (primary manual)

Brand: Sony Pages: 1

PCV-V200G VAIO User Guide (primary manual)

Brand: Sony Pages: 1

PCV-RZ56G VAIO User Guide (primary manual)

Brand: Sony Pages: 1

PCV-RZ40C1F - Vaio Desktop Computer

Brand: Sony Pages: 1

Brand: Sony Pages: 2

PCV-RZ26G - Vaio Desktop Computer

Brand: Sony Pages: 1

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands