Dell Color Laser Printer 2130cn, Service Manual

Page: 86 / 900

1 - 60
Chapter 1 Troubleshooting
- This error is displayed when the Network Protocol Adapter is installed on the
printer and then removed, or when a contact failure has occurred at the Network
Protocol Adapter.
Reinstalling the Network Protocol Adapter allows you to use the printer as it was
before the error occurred.
- To return the printer to the state it was in before the Network Protocol Adapter
was installed, reset the printer using the following procedure.
<Reset Procedure>
1. Power OFF the printer.
2. Power ON the printer while pressing the [MENU] button and [
3
(SET)] button at
the same time.
Keep the buttons pressed until the message "Reset Security Init Network" is
displayed.
3. Press the [
3
(SET)] button.
4. Press the [ 3 (SET)] button when the message "Init Network Are you sure?"
5. Power OFF the printer and then ON when the message "Reset Security Init
Network" is displayed.
- In the event of loss of the Network Protocol Adapter, the following network
protocols will be unavailable. To use these protocols, purchase and install a new
Network Protocol Adapter.
802.1x (Wired), NetWare (IP), SNMPv3, HTTPS or WSD (Print)
To use the printer without using the functions of the Network Protocol Adapter
while waiting for a new Network Protocol Adapter to be delivered, reset the printer.