Dell Color Laser Printer 2130cn, Service Manual

Page: 117 / 900

1 - 91
Chapter 1 Troubleshooting
Flows 50 Paper Jam 077-103/077-104/077-105
When starting SSF printing, an error will occur by pulling out a document on the
SSF by force.
Yes
Checking the FUSER ASSY installation
Reseat the FUSER ASSY.
Warning: Start the operation after the
FUSER ASSY has cooled down.
Does the error still occur when printing?
No
END
Replace the FUSER ASSY and clear
the Fuser Life Counter using the
diagnosis. (Refer to the Tech Sheet.).
Yes
Checking the Exit Sensor for operation
Does the number on the screen
increase by one, when the actuator of
the Exit Sensor in the FUSER ASSY is
operated?
Checked by [Digital Input] - [DI-3] in
[IOT Diag] of diagnosis.
Warning: Start the operation after the
FUSER ASSY has cooled down.
No
Checking the paper
Replace to know good
paper.
Does the error still occur
when printing?
077-103 077-104 077-105
No
Yes
Replace the FUSER ASSY
and clear the Fuser Life
Counter using the
diagnosis.
END
A
Checking after replacing
the FUSER ASSY.
Replace the FUSER ASSY
after turning off the power.
NOTE:When you have
replaced the fuser, initialize
the life counter of the
Fuser. For details, refer to
the supplied technical
sheet.
NOTE:Some of pich roller
came off.
Refer to Figure 1.
Does the error still occur
when printing?
No
Yes
Replace the Printer.
END