manualshive.com logo in svg

Dell Color Laser Printer 2130cn, Service Manual

Share
Download
Dell Color Laser Printer 2130cn Service Manual Download Page 348

1 - 322

Chapter 1   Troubleshooting

FIP-1.P2   Blank print (No print)

Trouble substance

The entire paper is printed pure white.

ESS and possible causative parts

- ROS ASSY (PL4.1.1)

- PHD ASSY (PL4.1.21)

- MOTOR ASSY DISP (Y/M/C/K) (PL5.1.3)

   or FRAME ASSY MOT (PL5.1.2)

- TONER CARTRIDGE K (PL5.1.21)

- TONER CARTRIDGE C (PL5.1.22)

- TONER CARTRIDGE M (PL5.1.23)

- TONER CARTRIDGE Y (PL5.1.24)

- TRANSFER ASSY (PL6.1.7)

- DRIVE ASSY SUB (PL7.1.1)

- DRIVE ASSY MAIN (PL7.1.2)

- DRIVE ASSY PH (PL7.1.4)

- PWBA ESS (PL8.1.7)

- PWBA MCU (PL8.2.13)

- PWBA HYUI (PL13.4.1)

Before commencing troubleshooting, check the paper transfer path. Make sure there is no foreign 
materials on the transfer path, such as staples, paper clips, scraps of paper and so on.

Step

Check

Remedy

Yes

No

1

Checking the blank print.
Print the contamination check  page.
Is the image printed correctly?

Printing data form 
is not suitable for 
the printer, then 
check the printing 
data which the 
problem 
generated.

Go to step 2.

2

Checking the Toner Type
Is the Non-Dell Toner seated?

Replace the toner 
with the Dell toner, 
then go to step 3.

Go to step 4.

3

Is the image printed correctly?

End of work.

Replace the 
PWBA ESS. 
(Refer to Removal 
42/ Replacement 
12.)

4

Checking after reseating all TONER CARTRIDGEs (Y/M/C/
K)
Reseat the TONER CARTRIDGEs, and check that their lock 
keys are in the lock positions.
Is the image printed correctly?

End of work.

Go to step 5. 

Summary of Contents for Color Laser Printer 2130cn





































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands