Dell Color Laser Printer 2130cn, Service Manual

Page: 364 / 900

1 - 338
Chapter 1 Troubleshooting
5
Checking after reseating the PHD ASSY
Reseat the PHD ASSY.
Is the image printed correctly?
End of work. Go to step 6.
6
Checking after reseating the FUSER ASSY
Warning: Start the operation after the FUSER ASSY has
cooled down.
Reseat the FUSER ASSY.
Is the image printed correctly?
End of work. Go to step 7.
7
Checking after reseating the PWBA MCU
Reseat the PWBA MCU.
Is the image printed correctly?
End of work. Go to step 8.
8
Checking after reseating the PWBA ESS
Reseat the PWBA ESS.
Is the image printed correctly?
End of work. Go to step 9.
9
Checking after reseating the TRANSFER ASSY
Reseat the TRANSFER ASSY.
Is the image printed correctly?
End of work. Go to step 10.
10
Checking after reseating the PWBA HVPS
Reseat the PWBA HVPS.
Is the image printed correctly?
End of work. Go to step 11.
11
Checking the ROS ASSY for connection
Check the connections between the ROS ASSY and PWBA
MCU.
Are P/J40, P/J 41, P/J411 and P/J 412 connected correctly?
Go to step 13.
Reconnect the
connector(s) P/
J40, P/J41, P/J411
and/or P/J412
surely, then go to
step 12.
12 Is the image printed correctly? End of work. Go to step 13.
13
Checking after replacing the PHD ASSY
Replace the PHD ASSY. (Refer to Removal 4/Replacement
50.)
Is the image printed correctly?
End of work. Go to step 14.
14
Checking after replacing the FUSER ASSY
Replace the FUSER ASSY. (Refer to Removal 5/
Replacement 49.)
Is the image printed correctly?
End of work. Go to step 15.
15
Checking after replacing the PWBA ESS
Replace the PWBA ESS. (Refer to Removal 42/
Replacement 12.)
Is the image printed correctly?
End of work. Go to step 16.
16
Checking after replacing the ROS ASSY
Replace the ROS ASSY. (Refer to Removal 45/
Replacement 9.)
Is the image printed correctly?
End of work.
Replace the
PWBA MCU.
(Refer to Removal
43/ Replacement
11.)
Step Check
Remedy
Yes No