Dell Color Laser Printer 2130cn, Service Manual

Page: 411 / 900

2 - 5
Chapter 2 Operation of Diag.
3.2 Entering diag. Customer mode
1) Turn off the power.
2) Turn on the power while holding down “ ” and “ ” keys.
3) Release the fingers from these keys when “Diagnosing...” is displayed.
4) The "Customer Mode" and "IOT Diag" are displayed. (Entered the Diag. mode.)
3.3 Selecting Diag. item
The diagnosis setting items are configured as menus, which can be operated with the control panel
keys. Arrow keys select menu items and “
3
” key activates functions.
3.4 Change method parameters value
For parameter setting, pressing “
3
” key after selecting an item from the menu displays the cur-
rent setting value of the item. Then a numeric value selected by “ ” and “ ” keys are written
into the NVM by “
3
” key.
3.5 Executing/Exiting Diag. mode
The diagnosis can be executed by as follows.
1) A test item is displayed. “
3
” key fixed the test item.
2) The display prompts the user to start the test. Press
“
3
”
key and start the test.
The diagnosis can be stopped by as follows.
1) During the diagnosis test, press “ CANCEL ” key.
2) The diagnosis is stopped, and the display indicates the one step higher menu.
When error occurred during Diag. operations, the display returns to the menu selective
state after displaying the error for about three seconds.