Dell Color Laser Printer 2130cn, Service Manual

Page: 292 / 900

1 - 266
Chapter 1 Troubleshooting
FIP-1. 57 Paper Jam 077-907
Step Check
Remedy
Yes No
Possible causative parts:
HARN ASSY DUP RELAY (PL1.2.13)
HARN ASSY L SIDE (PL3.1.18)
HARN ASSY OPTION (PL3.1.20)
ROLL ASSY REGI (PL3.2.9)
ROLLREGI METAL (PL3.2.10/Regi Sensor (PL3.2.13)
FUSER ASSY (PL6.1.1)
PWBA MCU (PL8.2.13)
FEEDER ASSY DUP (PL11.1.1)
1
Checking the COVER ASSY FRONT for latching
Open and close the COVER ASSY FRONT, then check the
latching.
Does the error still occur when printing?
Go to step 2. End of work.
2
Checking after reseating the FUSER ASSY
Reseat the FUSER ASSY.
Warning: Start the operation after the FUSER ASSY has
cooled down.
Does the error still occur when printing?
Go to step 3. End of work.
3
Checking after reseating the Duplex
Reseat the Duplex.
Does the error still occur when printing?
Go to step 4. End of work.
4
Checking the DRIVE ASSY EXIT for operation
Does the DRIVE ASSY EXIT operate properly?
Checked by [Digital Output]-[DO-D] on [IOT Diag] of
diagnosis.
During this check, cheat the interlock switch (HARN ASSY
INTERLOCK).
Go to step 5.
Replace FEEDER
ASSY DUP.
5
Checking the DRIVE ASSY DUP for operation
Does the DRIVE ASSY DUP operate properly?
Checked by [Digital Output]-[DO-12] on [IOT Diag] of
diagnosis.
During this check, cheat the interlock switch (HARN ASSY
INTERLOCK).
Go to step 6.
Replace FEEDER
ASSY DUP.
6
Checking the Duplex Clutch for operation
Does the Duplex Clutch operate properly?
Checked by [Digital Output]-[DO-35] on [IOT Diag] of
diagnosis.
During this check, cheat the interlock switch (HARN ASSY
INTERLOCK).
Go to step 7.
Replace FEEDER
ASSY DUP.
7
Checking the SENSOR PHOTO (REGI SENSOR) for
operation
Does the number on the screen increase by one, every time
the actuator of the SENSOR PHOTO (REGI SENSOR) is
operated?
Checked by [Digital Input]-[DI-2] in [IOT Diagnosis] of
diagnosis.
Go to step 8. Go to step 11.