2-40
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
OL-13271-03
Chapter 2 Cisco Catalyst Blade Switch 3130 and 3032 for Dell Cisco IOS Commands
authentication priority
This example shows how to set MAC authentication Bypass (MAB) as the first authentication method
and web authentication as the second authentication method:
Switch(config)#
authentication priority mab webauth
You can verify your settings by entering the
show authentication
privileged EXEC command.
Related Commands
Command
Description
authentication
control-direction
Configures the port mode as unidirectional or bidirectional.
authentication event
Sets the action for specific authentication events.
authentication
fallback
Configures a port to use web authentication as a fallback method for clients
that do not support IEEE 802.1x authentication.
authentication
host-mode
Sets the authorization manager mode on a port.
authentication open
Enables or disables open access on a port.
authentication order
Sets the order of authentication methods used on a port.
authentication
periodic
Enables or disables reauthentication on a port.
authentication
port-control
Enables manual control of the port authorization state.
authentication timer
Configures the timeout and reauthentication parameters for an
802.1x-enabled port.
authentication
violation
Configures the violation modes that occur when a new device connects to a
port or when a new device connects to a port after the maximum number of
devices are connected to that port.
mab
Enables MAC authentication bypass on a port.
mab eap
Configures a port to use Extensible Authentication Protocol (EAP).
show authentication
Displays information about authentication manager events on the switch.
