2-376
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
OL-13271-03
Chapter 2 Cisco Catalyst Blade Switch 3130 and 3032 for Dell Cisco IOS Commands
nmsp
nmsp
Use the
nmsp
global configuration command to enable Network Mobility Services Protocol (NMSP) on
the switch. This command is available only when your switch is running the cryptographic (encrypted)
software image. Use the
no
form of this command to return to the default setting.
nmsp
{
enable
| {
notification interval
{
attachment
|
location
}
interval-seconds
}}
no nmsp
{
enable
| {
notification interval
{
attachment
|
location
}
interval-seconds
}}
Syntax Description
Defaults
NMSP is disabled.
Command Modes
Global configuration
Command History
Usage Guidelines
Use the
nmsp
global configuration command to enable the switch to send NMSP location and
attachment notifications to a Cisco Mobility Services Engine (MSE).
Examples
This example shows how to enable NMSP on a switch and set the location notification time to 10
seconds:
Switch(config)#
nmsp enable
Switch(config)#
nmsp notification interval location 10
Related Commands
enable
Enable the NMSP features on the switch.
notification interval
Specify the NMSP notification interval.
attachment
Specify the attachment notification interval.
location
Specify the location notification interval.
interval-seconds
Duration in seconds before a switch sends the MSE the location or
attachment updates. The range is 1 to 30; the default is 30.
Release
Modification
12.2(50)SE
This command was introduced.
Command
Description
clear nmsp statistics
Clears the NMSP statistic counters.
nmsp attachment suppress
Suppresses reporting attachment information from a specified
interface.
show nmsp
Displays the NMSP information.
