2-700
Cisco Catalyst Blade Switch 3120 for HP Command Reference
OL-12248-03
Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commands
snmp-server host
the
snmp-server host
command for that host must be enabled. Some notification types cannot be
controlled with the
snmp-server enable
traps
command. For example, some notification types are
always enabled. Other notification types are enabled by a different command.
The
no snmp-server host
command with no keywords disables traps, but not informs, to the host. To
disable informs, use the
no snmp-server host informs
command.
Examples
This example shows how to configure a unique SNMP community string named
comaccess
for traps and
prevent SNMP polling access with this string through access-list 10:
Switch(config)#
snmp-server community comaccess ro 10
Switch(config)#
snmp-server host 172.20.2.160 comaccess
Switch(config)#
access-list 10 deny any
This example shows how to send the SNMP traps to the host specified by the name
myhost.cisco.com
.
The community string is defined as
comaccess
:
Switch(config)#
snmp-server enable traps
Switch(config)#
snmp-server host myhost.cisco.com comaccess snmp
This example shows how to enable the switch to send all traps to the host
myhost.cisco.com
by using the
community string
public
:
Switch(config)#
snmp-server enable traps
Switch(config)#
snmp-server host myhost.cisco.com public
You can verify your settings by entering the
show running-config
privileged EXEC command.
Related Commands
Command
Description
show running-config
Displays the operating configuration. For syntax information, use this
link to the Cisco IOS Release 12.2 Command Reference listing page:
http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/prod_comma
nd_reference_list.html
Select the
Cisco IOS Commands Master List, Release 12.2
to navigate
to the command.
snmp-server enable traps
Enables SNMP notification for various trap types or inform requests.
