B-6
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
OL-13271-03
Appendix B Cisco Catalyst Blade Switch 3130 and 3032 for Dell Debug Commands
debug dot1x
debug dot1x
Use the
debug dot1x
privileged EXEC command to enable debugging of the IEEE 802.1x authentication
feature. Use the
no
form of this command to disable debugging.
debug dot1x
{
all
|
errors
|
events
|
feature
|
packets
|
registry
|
state-machine
}
no debug dot1x
{
all
|
errors
|
events
|
feature
|
packets
|
registry
|
state-machine
}
Syntax Description
Note
Though visible in the command-line help strings, the
redundancy
keyword is not supported.
Command Default
Debugging is disabled.
Command Modes
Privileged EXEC
Command History
Usage Guidelines
The
undebug dot1x
command is the same as the
no debug dot1x
command.
On a stacking-capable switch, when you enable debugging, it is enabled only on the stack master. To
enable debugging on a stack member, you can start a session from the stack master by using the
session
switch-number
privileged EXEC command. Then enter the
debug
command at the command-line
prompt of the stack member. You also can use the
remote command
stack-member-number
LINE
privileged EXEC command on the stack master switch to enable debugging on a member switch without
first starting a session.
Related Commands
all
Display all IEEE 802.1x authentication debug messages.
errors
Display IEEE 802.1x error debug messages.
events
Display IEEE 802.1x event debug messages.
feature
Display IEEE 802.1x feature debug messages.
packets
Display IEEE 802.1x packet debug messages.
registry
Display IEEE 802.1x registry invocation debug messages.
state-machine
Display state-machine related-events debug messages.
Release
Modification
12.2(40)EX1
This command was introduced.
Command
Description
show debugging
Displays information about the types of debugging that are enabled.
show dot1x
Displays IEEE 802.1xstatistics, administrative status, and operational status
for the switch or for the specified port.
