B-63
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
OL-13271-03
Appendix B Cisco Catalyst Blade Switch 3130 and 3032 for Dell Debug Commands
debug platform stack-manager
debug platform stack-manager
Use the
debug platform stack-manager
privileged EXEC command to enable debugging of the stack
manager software. Use the
no
form of this command to disable debugging.
debug platform stack-manager
{
all
|
rpc
|
sdp
|
sim
|
ssm
|
trace
}
no debug platform stack-manager
{
all
|
rpc
|
sdp
|
sim
|
ssm
|
trace
}
Note
This command is supported only on stacking-capable switches.
Syntax Description
Defaults
Debugging is disabled.
Command Modes
Privileged EXEC
Command History
Usage Guidelines
The
undebug platform stack-manager
command is the same as the
no debug platform
stack-manager
command.
On a stacking-capable switch, when you enable debugging, it is enabled only on the stack master. To
enable debugging on a stack member, you can start a session from the stack master by using the
session
switch-number
privileged EXEC command. Then enter the
debug
command at the command-line
prompt of the stack member. You also can use the
remote command
stack-member-number
LINE
privileged EXEC command on the stack master switch to enable debugging on a member switch without
first starting a session.
Related Commands
all
Display all stack manager debug messages.
rpc
Display stack manager remote procedure call (RPC) usage debug messages.
sdp
Display the Stack Discovery Protocol (SDP) debug messages.
sim
Display the stack information module debug messages.
ssm
Display the stack state-machine debug messages.
trace
Trace the stack manager entry and exit debug messages.
Release
Modification
12.2(40)EX1
This command was introduced.
Command
Description
show debugging
Displays information about the types of debugging that are enabled.
