2-446
Cisco Catalyst Blade Switch 3120 for HP Command Reference
OL-12248-03
Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commands
show arp access-list
show arp access-list
Use the
show arp access-list
user EXEC command to display detailed information about Address
Resolution Protocol (ARP) access control (lists).
show arp access-list
[
acl-name
] [ | {
begin
|
exclude
|
include
}
expression
]
This command is supported only if your switch is running the IP services feature set.
Syntax Description
Command Modes
User EXEC
Command History
Usage Guidelines
Expressions are case sensitive. For example, if you enter |
exclude
output
, the lines that contain
output
are not displayed, but the lines that contain
Output
are displayed.
Examples
This is an example of output from the
show arp access-list
command:
Switch>
show arp access-list
ARP access list rose
permit ip 10.101.1.1 0.0.0.255 mac any
permit ip 20.3.1.0 0.0.0.255 mac any
Related Commands
acl-name
(Optional) Name of the ACL.
| begin
(Optional) Display begins with the line that matches the
expression
.
| exclude
(Optional) Display excludes lines that match the
expression
.
| include
(Optional) Display includes lines that match the specified
expression
.
expression
Expression in the output to use as a reference point.
Release
Modification
12.2(40)EX1
This command was introduced.
Command
Description
arp access-list
Defines an ARP ACL.
deny (ARP access-list
configuration)
Denies an ARP packet based on matches against the Dynamic Host
Configuration Protocol (DHCP) bindings.
ip arp inspection filter vlan
Permits ARP requests and responses from a host configured with a
static IP address.
permit (ARP access-list
configuration)
Permits an ARP packet based on matches against the DHCP bindings.
