Dell 3333DN User Manual Download Page 263

Page: 263 / 303

56 Standard USB port disabled

Try one or more of the following:

•

Touch Continue to clear the message.
The printer discards any data received through the USB port.

•

Make sure the USB Buffer menu item is not set to Disabled.

56 USB port <x> disabled

<x> is the number of the USB port.
Try one or more of the following:

•

Touch Continue to clear the message.
The printer discards any data received through the USB port.

•

Make sure the USB Buffer menu item is not set to Disabled.

58 Too many flash options installed

Turn the printer off.

Unplug the power cord from the wall outlet.

Remove the excess flash memory.

Connect the power cord to a properly grounded outlet.

Turn the printer back on.

58 Too many trays attached

Turn the printer off.

Unplug the power cord from the wall outlet.

Remove the additional trays.

Connect the power cord to a properly grounded outlet.

Turn the printer back on.

59 Incompatible tray <x>

Try one or more of the following:

•

Remove the specified tray.

•

Touch Continue to clear the message and continue printing without using the specified tray.

Troubleshooting

263

Summary of Contents for 3333DN
















































































































































































































































































































Search results

Summary of Contents for 3333DN

Reviews:

Related manuals for 3333DN

Brands by name

Popular brands

Dell 3333DN, User Manual

Search results

Summary of Contents for 3333DN

Reviews:

Related manuals for 3333DN

Brands by name

Popular brands