Dell 3333DN User Manual Download Page 241

Page: 241 / 303

Jam number

To access the jam

231

Open the front door, and then open the rear door.

233

Remove Tray 1, and then depress the lever.
Note: For alternative access to the jam, open the front door, and then open the rear door.

234

Try one or more of the following:

•

Open the front door, and then open the rear door.

•

Remove Tray 1, and then depress the lever.

235

Remove the jam from the standard exit bin.

240-249

Remove Tray 2.

250

Open the multipurpose feeder door.

251

Open the multipurpose feeder door.

290-295

Try one or more of the following:

•

Open the ADF cover, and then remove the separator roll.

•

Open the scanner cover.

•

Remove the ADF tray.

200 and 201 paper jams

CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot

component, allow the surface to cool before touching.

Pull the tray completely out.

Clearing jams

241

Summary of Contents for 3333DN
















































































































































































































































































































Search results

Summary of Contents for 3333DN

Reviews:

Related manuals for 3333DN

Brands by name

Popular brands

Dell 3333DN, User Manual

Search results

Summary of Contents for 3333DN

Reviews:

Related manuals for 3333DN

Brands by name

Popular brands